medicine word

low convex -definition of low convex by MedicineWord.com,a Medicine Dictionary

©http://medicineword.com From:http://www.medicineword.com/low+convex.shtml

low convex The segment of a sphere of long radius.

Buy It Now Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.531" ID, 1.125" OD, 0.188" Thick (Pack of 1) [Brand:Small Parts][Price:] Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA. The male half of the spherical washer set, the positive projection mates into the female component - acting like a ball and socket Male positive projection is fully machined Low Carbon Steel, Case Hardened, Black Oxide Plated Machinery, MRO, Power Generation, Transportation, Leveling Made In USA for excellent quality conformance Buy Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.531" ID, 1.125" OD, 0.188" Thick (Pack of 1) now!Total: @

Buy It Now Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.406" ID, 0.875" OD, 0.130" Thick (Pack of 1) [Brand:Small Parts][Price:] Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA. The male half of the spherical washer set, the positive projection mates into the female component - acting like a ball and socket Male positive projection is fully machined Low Carbon Steel, Case Hardened, Black Oxide Plated Machinery, MRO, Power Generation, Transportation, Leveling Made In USA for excellent quality conformance Buy Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.406" ID, 0.875" OD, 0.130" Thick (Pack of 1) now!Total: @

Buy It Now Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.938" ID, 1.750" OD, 0.240" Thick (Pack of 1) [Brand:Small Parts][Price:] Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA. The male half of the spherical washer set, the positive projection mates into the female component - acting like a ball and socket Male positive projection is fully machined Low Carbon Steel, Case Hardened, Black Oxide Plated Machinery, MRO, Power Generation, Transportation, Leveling Made In USA for excellent quality conformance Buy Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.938" ID, 1.750" OD, 0.240" Thick (Pack of 1) now!Total: @

Buy It Now Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.219" Thick (Pack of 1) [Brand:Small Parts][Price:] Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA. The male half of the spherical washer set, the positive projection mates into the female component - acting like a ball and socket Male positive projection is fully machined Low Carbon Steel, Case Hardened, Black Oxide Plated Machinery, MRO, Power Generation, Transportation, Leveling Made In USA for excellent quality conformance Buy Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.219" Thick (Pack of 1) now!Total: @

Buy It Now Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.330" Thick (Pack of 1) [Brand:Small Parts][Price:] Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA. The male half of the spherical washer set, the positive projection mates into the female component - acting like a ball and socket Male positive projection is fully machined Low Carbon Steel, Case Hardened, Black Oxide Plated Machinery, MRO, Power Generation, Transportation, Leveling Made In USA for excellent quality conformance Buy Spherical Flat Washer, Male (Convex), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.330" Thick (Pack of 1) now!Total: @

Pre./Next

Previous: low affinity platelet factor IV, low aspect ratio, low back pain, low-calorie diet,


Next: low delirium, low density lipoprotein, low density lipoprotein receptor,